Henko AutoLab - 350z/G35 Axle Spacers - PAIR

Stop breaking your axles!

If you've had to replace axles from excessive noise or play at the bearing or from flat out breaking at the CV joint then you likely need axle spacers.

Our Henko AutoLab 350z / G35 Axle Spacers are made to slip over the splines of the axle and sandwich between the axle and the back of the hub. This removes the need for longer bolts at the differential which can become a weak point and also makes for a more affordable solution.

Axle spacers are used to ensure the CV joints have the correct amount of internal engagement. When you lower your car, increase camber, or add dual caliper brackets, the CV joints "stretch out" due to the increased distance between the hub and the differential. This increases the risk of the bearings wearing out and failing prematurely or the CV joint fully separating and breaking completely. Using our axle spacers compresses the CV joint back to a suitable engagement and restores their original strength and reliability.

SOLD AS A PAIR

What size axle spacers do I need?

7mm is recommended when using our 350z / G35 dual caliper bracket or if your car is  moderately lowered with slight camber.

10mm is recommended if you have a dual caliper bracket AND your car is moderately lowered with up to -3 degrees of camber

14mm is recommended if you have a dual caliper bracket AND your car is lowered with over -3 degrees of camber - or if your car is extremely low and cambered.