350z/G35 Hydro E-brake + Full Dual Caliper Kit (10% Combo Discount)

Order everything at once and save 10% + FREE Axle Spacers!

We make installing a hydro in your 350z or G35 easy for you. In this kit you're getting everything you need to put a hydro e-brake and dual calipers on your 350z/G35. You just need to supply your own second set of calipers.

For more details on anything included in the kit, click the links below!

This kit includes:

• Henko Low-Pro Reverse Hydro - Z/G Edition
• Henko Z/G Dual Caliper Brackets
• Remote Reservoir with Feedline
• Z/G Hydro Brake Line Kit
  
• Axle Spacers - FREE!

FREQUENTLY ASKED QUESTIONS:

What size master cylinder should I get?
You have options to purchase either the .625", .70" or .750" sized Wilwood master cylinders. For cars with a single piston rear caliper, .625" or .70" might be best. For cars with Brembo/Akebono calipers, the .70" or .750" might be best.
The .625" will have the softest handle pull but you will have a longer handle "throw" before the rear brakes lock up. The .750" master will have the shortest throw but require more handle force to lock the rear brakes and can be overly stiff. 
Our general recommendation is the .70" master for a nice middle ground that typically works well for most setups.  For G35s, we suggest using the  .70" or .750" to minimize handle pull so that less of the shifter bezel needs to be trimmed, regardless of what calipers you use.

Bench bleeding your master before installation is highly recommended and will greatly aid with bleeding your fluid system. 

Which size axle spacers do I need?
7mm is our recommended minimum to ensure the space created by installing the brackets are taken up.
10mm is recommended if your car is moderately lowered and your camber is less than -3 degrees.
14mm is recommended if your car is very low or your camber is more than -3 degrees.

What calipers will work for this kit?
This kit comes with hardware for both Brembo and non-Brembo calipers. However, you can not mix and match calipers. Meaning if you have Brembo for your normal brakes, you must use Brembo for your second set. If they're non-Brembo you must also match the year you have. 03-05 calipers and rotors are different size to 06+ and will not fit together.