370z / G37 Complete Rear Alignment Control Arm Bundle

Henkō AutoLab

370z / G37 Complete Rear Alignment Control Arm Bundle

$875.00 $1,095.00

No reviews

Complete three-arm rear control arm package
Lockouts, wrenches, and toe plates included
2-Year Crash Replacement Plan included
Free ground shipping
Save $220+

EVERYTHING YOU NEED
ONE COMPLETE PACKAGE

The Complete Rear Alignment Kit combines all three adjustable rear control arms with the hardware, tools, and coverage needed for a complete rear suspension setup.

Included:

Rear camber, toe, and traction arms
Eccentric lockout bolt kit
Aluminum adjustment wrenches
Henko Autolab Toe plates
2-Year Crash Replacement Plan

Everything needed to install, adjust, and maintain the rear setup in one package.

What each arm does

Rear Toe Arms
Precisely set rear toe for improved stability, predictable response, and consistent tire contact. Proper toe adjustment is critical for controlling rear grip and preventing unnecessary tire wear.

Rear Camber Arms
Correct excessive negative camber caused by lowering the vehicle. Adjusting to the proper camber setting improves tire contact, rear grip balance, and overall alignment consistency.

Rear Traction Arms
Adjust traction-arm length to influence anti-squat characteristics and dynamic toe behavior as the suspension moves through its travel. This gives drivers another level of control over how the rear suspension responds under acceleration and compression.

Built for Real Use

Why Henko Arms

—

Oversized PTFE-Lined Rod Ends

3/4-inch PTFE-lined motorsport rod ends selected for strength, smooth articulation, and durability under repeated street, drift, and track use.

—

30mm Hex Center Links

Large 30mm hex 6061 aluminum center links designed for increased strength and durability under aggressive use.

—

Stainless Steel Rod-End Spacers

Stainless steel spacers provide long-term durability and corrosion resistance in a high-load suspension location.

—

Cerakote Finish

Durable ceramic coating selected for long-term finish durability, corrosion resistance, and a clean appearance under real street and track use.

—

Laser-Marked Adjustment Reference

Adjustment information is marked directly on the arm ends to provide a clear reference while setting alignment on the car.

—

Built for the Z/G Chassis

Developed by the team behind Henko's Z/G hydraulic handbrake kits and built with the same focus on strength, serviceability, and real-world track use.

swipe for more

INCLUDED BONUSES

Replaces the factory eccentric bolts that can slip and throw alignment off over time.
Once installed, your rear alignment stays where you set it.

Anodized billet wrenches sized specifically for these arms.
Designed to make adjustments easier without scratching up brand-new parts.

Perfect for at-home or track-side toe adjustments.
A simple tool that makes alignment checks faster and more repeatable.

INCLUDED WITH THE COMPLETE KIT

Built to Be Driven.
Covered When It Goes Wrong.

If a crash damages your Henko rear control arms, the included Crash Replacement Plan helps get the car repaired and back on track without purchasing another complete set.

2 Years Coverage

Up to 2 Arms Replaced

$100 Value Included

Damaged arms must be returned to Henko. Coverage applies to the original purchaser and is subject to the full plan policy.

View full plan details →

Complete Kit Value

$1,095 in Parts. $875 as a Package.

Every component in the Complete Rear Alignment Kit is available as a standalone product. Bundle the full system together and save $220 while receiving free ground shipping.

Rear camber arms $255

Rear toe arms $265

Rear traction arms $255

Complete eccentric lockout kit $50

Billet adjustment wrenches $65

Toe plates $105

2-Year Crash Replacement Plan $100

Vehicle fitment list

2009–2020 Nissan 370Z
2008–2013 Infiniti G37 Coupe
2009–2013 Infiniti G37 Sedan
2007–2008 Infiniti G35 Sedan

FAQ

WHAT CARS DOES THIS FIT?

2009–2020 Nissan 370Z
2008–2013 Infiniti G37 Coupe
2009–2013 Infiniti G37 Sedan
2007–2008 Infiniti G35 Sedan

DO I NEED TRUE COILOVERS FOR THIS?

Yes. The Toe Arms in our kit replace the spring bucket arm, ehich then requires the use of true coilovers.

IS THIS SETUP STREET FRIENDLY?

Yes. These arms are designed to be daily-drivable with no extreme NVH increase, while still offering the strength and adjustment range needed for aggressive driving.

DO I STILL NEED A PROFESSIONAL ALIGNMENT?

Yes. While the included tools make adjustments and checks easier, a professional alignment is still recommended for final setup.

WHAT'S INCLUDED IN THE BUNDLE?

The bundle includes adjustable rear toe, camber, and traction arms, along with launch-only bonuses: adjustment wrenches, toe plates, eccentric lockout bolts, and a crash replacement plan.

WHAT IS THE CRASH REPLACEMENT PLAN?

For this launch, the bundle includes a one-time crash replacement option for 2 Henko rear control arms if it’s damaged during use.

This is included free during launch and will be offered as a paid add-on later. Full details are available on the coverage page.

STILL HAVE QUESTIONS?

We're happy to help, just reach out.
You can contact us through our contact page or email us directly at sales@henkoautolab.com.